Factory For Cat5e Network Cable - Audio, Control and Instrumentation Cables (Multi-Pair, Unscreened) – AIPU

Application

1. The cable is designed for MS, Sound, Audio, Security, Safety, Control and Instrumentation application indoor & outdoor. Multi-pair cables are available. It could be widely used for production process control and Device Converter audio instrument.
2. Individually Screened, Al-PET tape with Tinned Copper Drain Wire shielded are optional.
3. PVC or LSZH sheath are both available.
4. Control cables are signal control for automation control and instrumentation applications. Control cables can measure and regulate automation systems, transportation, construction, construction, mining and industry. 
5. Control cables are divided into CY(shielded cable), YY(unshielded cable) and SY(steel wire shielded). The most commonly used are aluminum foil shields, braided shields, or both. Multi-core or twisted multi-pair flexible cables are generally selected according to the requirements of field wiring or use occasions. The Gauge control cable is 28AWG to 2AWG. Voltage: 300V 450V 600V to 750V Control cables are not used for power transmission and are usually insulated with conventional PVC, either shielded or unshielded.
6. The difference with power cables is that power cables are used to carry electricity, usually at 600/1000V or higher, and usually require a robust sheath. Both control cables and power cables can be used in industrial, residential and commercial applications.

Constructions

1. Conductor: Stranded Tinned Copper Wire
2. Insulation: Polyolefin, PVC
3. Cabling: Twist Pairs laying-up
4. Sheath: PVC/LSZH

Installation Temperature: Above 0℃
Operating Temperature: -15℃ ~ 70℃

Reference Standards

BS EN 60228
BS EN 50290
RoHS Directives
IEC60332-1

Identification of Insulation

(Notes: Other cores are available upon request.)