Oem/Odm Supplier Automotive Control Cables - Foundation Fieldbus Type A Cable – AIPU
Oem/Odm Supplier Automotive Control Cables - Foundation Fieldbus Type A Cable – AIPU Detail:
Constructions
1. Conductor: Stranded Oxygen Free Copper
2. Insulation: S-FPE
3. Identification: Red, Green
4. Bedding: PVC
5. Screen:
● Aluminum/Polyester Tape
● Tinned Copper Wire Braided (60%)
6. Sheath: PVC/LSZH
7. Sheath: Violet
(Note: Armor by Galvanized Steel Wire or Steel Tape is upon request.)
Installation Temperature: Above 0ºC
Operating Temperature: -15ºC ~ 70ºC
Minimum Bending Radius: 8 x overall diameter
Reference Standards
BS EN/IEC 61158
BS EN 60228
BS EN 50290
RoHS Directives
IEC60332-1
Electrical Performance
Working Voltage |
300V |
Test Voltage |
1.5KV |
Characteristic Impedance |
150 Ω ± 10 Ω 3~20MHz |
Conductor DCR |
57.0 Ω/km (Max. @ 20°C) |
Insulation Resistance |
1000 MΩhms/km (Min.) |
Mutual Capacitance |
35 nF/Km @ 800Hz |
Part No. |
Conductor |
Insulation |
Sheath |
Screen |
Overall |
AP-FF 1x2x22AWG |
7/0.25 |
0.7 |
1.0 |
AL-Foil + TC Braided |
8.1 |
Product detail pictures:


Related Product Guide:
Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for Oem/Odm Supplier Automotive Control Cables - Foundation Fieldbus Type A Cable – AIPU , The product will supply to all over the world, such as: Libya, Afghanistan, Argentina, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.

Write your message here and send it to us