Professional Factory For Power Limited Circuit Cable - Electric Connect Wire Multicore Speaker Cable For Commercial Infrastructure Car Audio Home HiFi Cinema Speaker System – AIPU

Application

1. The cable is designed for loudspeaker application. It could be used for car audio, home HiFi, cinema, or speaker system with high-end cables for an unforgettable sound experience.
2. The three key electrical characteristics of a speaker cable are resistance, capacitance, and inductance. Of these, resistance is the most important. The speaker cable is the wire that connects the speaker to the amplifier source. 
3. The resistance of loudspeaker is mainly affected by conductor length and conductor cross-sectional area. The shorter the conductor, the lower the resistance, so reduce the length of the wire as much as possible, and place the speakers as far apart as possible, and the two speakers have the same lead length, so that they have the same impedance value. The larger the cross-sectional area of a conductor, the smaller the resistance.
4. Copper is the most suitable material for conductor according to cost and resistance. Apro’s speaker wire is also a pure copper conductor. Insulation is PO material or low smoke halogen free.

Constructions

1. Conductor: Stranded Oxygen Free Copper
2. Insulation: Polyolefin
3. Cabling: Cores laying-up
4. Sheath: PVC/LSZH

Installation Temperature: Above 0℃
Operating Temperature: -15℃ ~ 70℃

Reference Standards

BS EN 60228
BS EN 50290
RoHS Directives
IEC60332-1

Identification of Insulation