Siemens PROFIBUS DP Cable 1x2x22AWG
Constructions
1. Conductor: Solid Oxygen Free Copper (Class 1)
2. Insulation: S-FPE
3. Identification: Red, Green
4. Bedding: PVC
5. Screen:
● Aluminum/Polyester Tape
● Tinned Copper Wire Braided (60%)
6. Sheath: PVC/LSZH/PE
7. Sheath: Violet
(Note: Armor by Galvanized Steel Wire or Steel Tape is upon request.)
Installation Temperature: Above 0ºC
Operating Temperature: -15ºC ~ 70ºC
Minimum Bending Radius: 8 x overall diameter
Reference Standards
BS EN/IEC 61158
BS EN 60228
BS EN 50290
RoHS Directives
IEC60332-1
Electrical Performance
|
Working Voltage |
30V |
|
Characteristic Impedance |
150 Ω ± 15 Ω @ 1MHz |
|
Conductor DCR |
57.1 Ω/km (Max. @ 20°C) |
|
Insulation Resistance |
1000 MΩhms/km (Min.) |
|
Mutual Capacitance |
30 nF/Km @ 800Hz |
|
Velocity of Propagation |
78% |
|
Part No. |
No. of Cores |
Conductor |
Insulation |
Sheath |
Screen (mm) |
Overall |
|
AP3079A |
1x2x22AWG |
1/0.64 |
0.9 |
1.0 |
AL-Foil + TC Braided |
8.0 |
|
AP3079ANH |
1x2x22AWG |
1/0.64 |
0.9 |
1.0 |
AL-Foil + TC Braided |
8.0 |
|
AP3079E |
1x2x22AWG |
7/0.25 |
0.9 |
1.0 |
AL-Foil + TC Braided |
8.0 |
|
AP70101E |
1x2x22AWG |
1/0.64 |
0.9 |
1.0 |
AL-Foil + TC Braided |
8.0 |
|
AP70101NH |
1x2x22AWG |
1/0.64 |
0.9 |
1.0 |
AL-Foil + TC Braided |
8.0 |
|
AP70102E |
1x2x22AWG |
7/0.25 |
0.9 |
1.0 |
AL-Foil + TC Braided |
8.0 |
|
AP70103E |
1x2x22AWG |
1/0.64 |
0.9 |
1.0 |
AL-Foil + TC Braided |
8.4 |
PROFIBUS (Process Field Bus) is a standard for fieldbus communication in automation technology and was first promoted in 1989 by BMBF (German department of education and research) and then used by Siemens.
PROFIBUS DP (Decentralized Peripherals) is used to operate sensors and actuators via a centralized controller in production (factory) automation applications.
PROFIBUS DP uses two core screened cable (bus system) with a violet sheath, and runs at speeds between 9.6 kbit/s and 12 Mbit/s.
